Playstation 2 Hardware

Playstation 2 Hardware

16.10.2013 20:54:59
Swap Trick FAQ

English


(by B.A.D/PARADOX)
(how to play a backup copy by booting with the original cd)


Here you'll find all the info and (IMPORTANT) all pictures to lear about how to play with a backup copy.
Just follow step-by-step.

1) Take a look to the two best consoles ;)

2) Place your Playstation 2 as shown in the picture and remove the marked screws.
Then remove the top cover but be careful, there are two connected cables, remove the cover slowly.

3) Look the picture. Remove the black disk (there is just a bit of glue).Under the black disk you'll see a white disk, later you have to extract the white disk from the dock. Now just extract the Eject & Reset button from the dock, there are no screws, so just pull out. Now remove the 4 screws (1-4). Now remove the cd-reader cover and extract the white disk. The white (magnetic) disk is needed to lock the cd-rom.

4) Now you can see the cd-rom reader

Ok, that's all. Now we can try to play a backup copy. Make a copy of an original PS2 game.
It's very important to have both disks, the original and the backup copy.

Connect to the PS2 all cables (power, joypad, video). Make sure the PS2 is turned off before to connect cables.

Now turn on the main power switch (on the rear). Place the original cd into the cd-reader and then place the white disk on top to lock the cd. Now press the Reset/Power button. The cd-reader will start at 1x speed, then after a second it will go to 4x speed...OK!!!
Now it's the time to be fast! Be careful, the cd is rotating!!!!
Remove the white disk and remove the original disk, insert the backup copy and place the white disk.
You must do these operations before the Playstaton 2 logo appears on the screen.

If you made everything in the right way you have your backup copy running.
Otherwise TURN-OFF the PS2 by pressing for 3-4 seconds the Reset Button and try again.
Don't try to repeat the operation just using the simple reset.
You must Turn-Off the PS2 by pressing for 3-4 seconds the Reset button.

I know, you need pratice to make your backup copy works. I tried 9 times before to have success.



PS2 Time Trick
(by B.A.D/PARADOX)

Ok, if you are not able to swap the cds by checking the disc speed change, then just use this time-trick.

Turn-off your PS2
Insert the original CD
Place the White Disk (Locker)
Now, check your watch (seconds)
Press the Reset button to Turn-on the PS2
Wait 10 seconds

Ok, not it's the time to swap, you have 5-10 seconds to swap disks
Remove the White Disk (Locker), Remove the Original CD
Insert the backup copy and place the White Disk (locker)

Ok, now you have the backup copy working.

Remember: 10 seconds after you pressed the Reset Button
and then 5-10 seconds to change the disk.




 
Comments:
Your comment has been saved!!!
The Captcha element applies the Captcha validation, which uses reCaptcha's anti-bot service to reduce spam submissions.

Disc Read Error PS2 FAQ
FAQ/Walkthrough

16.October 2013
Troubleshooting for Sony Playstation 2 Console
FAQ/Walkthrough

15.October 2013
DVD Region Hack
Cheats

14.October 2013
FAQ/Walkthrough

14.October 2013
FAQ for the US Playstation 2 Memory Card
FAQ/Walkthrough

15.October 2013
Features FAQ
FAQ/Walkthrough

15.October 2013
Swap Trick FAQ
FAQ/Walkthrough

16.October 2013
Console Features
FAQ/Walkthrough

15.October 2013
Laser Adjustment Instructions
FAQ/Walkthrough

14.October 2013
FAQ/Walkthrough

15.October 2013
 
Most Popular
30. December 2013
25.September 2015
07.June 2019
28.February 2016
20.August 2014
25.June 2019
30.January 2018